BXLKT - 48083 4-BROMOFLUOROBENZENE/1X1ML/MEOH/2000UG/ML

  • MSDS: BXLKT
  • Manufacturer: SUPELCO INC
  • Product Name: 48083 4-BROMOFLUOROBENZENE/1X1ML/MEOH/2000UG/ML
  • National Stock Number: 6810-00F040363
Product Identification

Product ID:48083 4-BROMOFLUOROBENZENE/1X1ML/MEOH/2000UG/ML
MSDS Date:05/02/1992
FSC:6810
NIIN:00F040363
MSDS Number: BXLKT

Responsible Party
SUPELCO INC
SUPELCO PARK
BELLEFONTE, PA 16823-0048
US

Emergency Phone: 814-359-3441

Info Phone: 814-359-3441

Cage: 54968

Contractor
SIGMA-ALDRICH INC.
14508 ST. LOUIS, MO 63103 US

Telephone: 314-771-5765/414-273-3850X5996

Cage: 54968

Ingredients

1-BROMO-4-FLUOROBENZENE *95-2*

CAS: 460-00-4

Fraction By Weight: 0.2%


METHANOL (METHYL ALCOHOL), COLUMBIAN SPIRITS *95-2*

CAS: 67-56-1

RTECS: PC1400000

Fraction By Weight: 99-100%

OSHA PEL 260 MG/CUM

ACGIH TLV: 262 MG/CUM (SKIN)

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Hazards

LD50 LC50 Mixture:ORAL LD50(RAT): 5628 MG/KG METHANOL
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:HARMFUL IF INHALED. FATAL IF
SWALLOWED. EYES: MAY CAUSE BLINDNESS.
Explanation of Carcinogenicity:SEE INGREDIENTS.
Effects of Overexposure:HEADACHE, NAUSEA, GASTROINTESTINAL DISTURBANCES

First Aid

First Aid:EYES: FLUSH W/WATER FOR 15 MINS. SKIN: FLUSH W/LARGE VOLUMES
OF WATER. INHALATION: MOVE TO FRESH AIR. IF BREATHING STOPS, GIVE
CPR. INGESTION: NEVER GIVE ANYTHING BY MOUTH IF UNCONSCIOUS. NEVER
TRY TO MAKE AN UNCONSICOUS PERSON VOMIT. GIVE2 TABLESPOONS OF
BAKING SODA IN A GLASS OF WATER, PRESS FINGER TO BACK OF TONGUE TO
INDUCE VOMITING. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Flash Point:50F
Lower Limits:6
Upper Limits:36
Extinguishing Media:CO2, DRY CHEMICAL, ALCOHOL FOAM
Fire Fighting Procedures:WEAR SELF CONTAINED BREATHING APPARATUS WHEN
FIGHTING A CHEMICAL FIRE.
Unusual Fire/Explosion Hazard:TOXIC VAPORS ARE FORMED WHEN MATERIAL IS
HEATED TO DECOMPOSITION.

Accidental Release

Spill Release Procedures:TAKE UP W/ABSORBENT MATERIAL. VENTILATE AREA.
ELIMINATE ALL IGNITION SOURCES.

Handling

Handling and Storage Precautions:REFRIGERATE IN SEALED CONTAINER. KEEP
AWAY FROM OXIDIZERS & FROM IGNITION SOURCES.
Other Precautions:AVOID EYE/SKIN CONTACT. AVOID BREATHING VAPORS.

Exposure Controls

Respiratory Protection:WEAR FACE MASK W/ORGANIC VAPOR CANISTER.
Ventilation:USE ONLY IN WELL VENTILATED AREA.
Protective Gloves:RUBBER
Eye Protection:PROTECTIVE GLASSES
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:149F
Melt/Freeze Pt:M.P/F.P Text:-144F
Vapor Pres:100
Vapor Density:1.1
Spec Gravity:0.79
Evaporation Rate & Reference:(ETHER=1): >1
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR COLORLESS LIQUID
Percent Volatiles by Volume:100

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS, CHROMIC ANHYDRIDE, LEAD PERCHLORATE, PERCHLORIC ACIDS
Stability Condition to Avoid:IGNITION SOURCES
Hazardous Decomposition Products:HYDROGEN FLUORIDE, HYDROGEN BROMIDE

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.